Facebook

1988 Custom Built Motorcycles Bobber Harley Shovelhead Ultra Patina For Sale $5000.00

1988 Custom Built Motorcycles Bobber Harley Shovelhead Ultra Patina

Check out this great Bobber listing!

Current Price: $5000.00 | Bid $5100.00 Now! | # of Bids: 1
End Time: 2017-06-01T20:24:52.000Z

| Located in Postal Code: B0W3T0

BUILT IN 2013 FOR THE WHARF RAT RALLY IN DIGBY NOVA SCOTIA,PAUGHCO RIGID FRAME WITH SPRING POST SEAT,HARLEY SPRINGER,FRESH 88 CUI,DELKRON BASE, BALANCED 4 1/4 HARLEY FLYWHEELS,S&S RODS,S&S 514 CAM,S&S CYLINDERS WITH KB 9.5/1PISTONS,S&S SUPER STOCK HEADS,DELLORTO DHLA 40MM CARB...COWPIE 4 SPEED WITH ANDREWS CLOSE RATIO,KICK ONLY,HYDRAULIC CLUTCH.HARLEY REAR CALIPER IN FRONT GMA INDA REAR...THIS SCOOT IS AWESOME T RIDE,PULLS, HARD AN IS SMOOTH AND COMFORTABLE...I RIDE HER ALL DAY..ALMOST EVERY DAY...EASY T START   CARB IS SWEET...CANT SAY ENOUGH...THE ULTIMATE SECOND BIKE...YA

1988 Custom Built Motorcycles Bobber Harley Shovelhead Ultra Patina

Check out this great Bobber listing!

Current Price: $5000.00 | Bid $5100.00 Now! | # of Bids: 1
End Time: 2017-06-01T20:24:52.000Z | Located in Postal Code: B0W3T0

Click here for more images!

Bid $5100.00 Now!


2006 Custom Built Motorcycles Chopper Custom Built Motorcycle For Sale $11500.00

2006 Custom Built Motorcycles Chopper Custom Built Motorcycle

Check out this great Bobber listing!

Current Price: $11500.00 | Bid $0.00 Now! | # of Bids: 0
End Time: 2017-06-01T01:10:34.000Z

| Located in Postal Code: 87104

Custom built, rigid frame bobber/chopper, 80 cubic inch S and S motor, less than 3K miles. Bank appraised at 14k, asking $11,500. Any reasonable offers will be considered. Serious inquires only, please. 

2006 Custom Built Motorcycles Chopper Custom Built Motorcycle

Check out this great Bobber listing!

Current Price: $11500.00 | Bid $0.00 Now! | # of Bids: 0
End Time: 2017-06-01T01:10:34.000Z | Located in Postal Code: 87104

Click here for more images!

Bid $0.00 Now!


2008 Custom Built Motorcycles Bobber 2008 Custom Built Motorcycle By S & S Ulitma Bobber Jack Daniels Scheme For Sale $14000.00

2008 Custom Built Motorcycles Bobber 2008 Custom Built Motorcycle By S & S Ulitma Bobber Jack Daniels Scheme

Check out this great Bobber listing!

Current Price: $14000.00 | Bid $0.00 Now! | # of Bids: 0
End Time: 2017-06-01T20:14:12.000Z

| Located in Postal Code: 34994

2008 Custom Built Motorcycle Ultima Bobber Jack DanielsCustom Cycle by S & S Customs1573cc6 speed baker Ulitma kit150 miles$10k custom JACK DANIELS paint scheme. Hard tail with springer front end and sportster bars. Excellent condition other than dime size scratch under the seat. Bike has been on display in a smoke free environment for years. Runs perfectly, completely serviced and up to date with no mechanical problems. Please feel free to ask questions!

2008 Custom Built Motorcycles Bobber 2008 Custom Built Motorcycle By S & S Ulitma Bobber Jack Daniels Scheme

Check out this great Bobber listing!

Current Price: $14000.00 | Bid $0.00 Now! | # of Bids: 0
End Time: 2017-06-01T20:14:12.000Z | Located in Postal Code: 34994

Click here for more images!

Bid $0.00 Now!

2017 Custom Built Motorcycles Bobber Mmw Super Air Girder 30,30 Boardtrack Racers ….insane For Sale $13000.00

2017 Custom Built Motorcycles Bobber Mmw Super Air Girder 30,30 Boardtrack Racers ....insane

Check out this great Bobber listing!

Current Price: $13000.00 | Bid $0.00 Now! | # of Bids: 0
End Time: 2017-06-01T02:12:14.000Z

| Located in Postal Code: 91362

 

 

  

 

MALIBU MOTORCYCLE WORKS

ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO)

WE SHIP WORLDWIDE

WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION

 TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD

PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS 

WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION

 MADE IN THE USA

NO ONE CAN SAY THAT WE DO NOT TAKE IT TO THE NEXT LEVEL !!!!

MMW SUPER AIR GIRDER BOARDTRACK RACER  30,30   

 

 

 

2017 MMW SUPER AIR GIRDER  BOARDTRACK   30'S  FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 35 DEGREE RAKE   ,SPECIAL   BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  SUPER AIR GIRDER     FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)30X4   MMW  WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS ,SPECIAL AIR    SPRING SEAT , KICK STAND ,

NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .

LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE 

 CHOPPER PRO-STREET  BOBBER CUSTOM

S&S ULTIMA LONG AND LOW

MOTORCYCLE 130,150,180,200, 240,250,280 300 330 360 RSD RIGHT SIDE DRIVE ,LEFT SIDE DRIVE LSD

BELT DRIVE BDL PRIMO , , KIT BIKE ,

On Sep-08-07 at 18:14:46 PDT, seller added the following information:

On Apr-11-13 at 23:43:27 PDT, seller added the following information:

<div style="text-align:center"><a style="text-decoration:none" href="http://mostpopular.sellathon.com/?id=AC358942"><img src="http://www.sellathon.com/Resources/Images/countercredit.gif" border="0"></a></div>

2017 Custom Built Motorcycles Bobber Mmw Super Air Girder 30,30 Boardtrack Racers ....insane

Check out this great Bobber listing!

Current Price: $13000.00 | Bid $0.00 Now! | # of Bids: 0
End Time: 2017-06-01T02:12:14.000Z | Located in Postal Code: 91362

Click here for more images!

Bid $0.00 Now!

2006 Custom Built Motorcycles Bobber Lc Fabrications Triumph Tt Deluxe Custom Board Track Café Racer Award Winner For Sale $24999.00

2006 Custom Built Motorcycles Bobber Lc Fabrications Triumph Tt Deluxe Custom Board Track Café Racer Award Winner

Check out this great Bobber listing!

Current Price: $24999.00 | Bid $24999.00 Now! | # of Bids: 0
End Time: 2017-06-03T19:29:16.000Z

| Located in Postal Code: 02048

I purchased bike in 2014 and had a VIN# assigned by MA State police. I added a hidden horn and hidden LED blinkers to get a valid inspection sticker. Clear title. I drove it to Larz Anderson European Motorcycle Day in Boston, MA. Drove it about 100 miles round trip. Bike drove flawless. I won "Best Custom" and "Participant's Choice Award".  

If you google "lc customs tt deluxe" you will find numerous articles about this very special bike. Built by custom bike builder Jeremy Cupp of LC Fabrication.

I'll post some of the links below. 

Per Jeremy:

The TT Deluxe was based around a 2006 Triumph Bonneville engine, and nearly every piece was hand made from scratch. It was intended to give me a platform to really stretch my abilities in every aspect of bike building, from fab to machine, engineering and design, all the way to paint,leather,and wiring…..without having to work around the usual constraints associated with a motorcycle. It is a useable motorcycle, although not a great daily rider…but then again its not the usual fancy paint a shiny engine bobber either! As always every piece was done by myself(with the occasional help of my wife) and has been the art side of what I do for several years now. The TT was an exercise in craftsmanship and has well served its purpose… to show people what it is Im trying …….to blend ethics and tradition of the past with modern ideas, equipment and materials.

This bike has been featured in:

The Horse Backstreet Choppers MagazineGreasy kulture MagazineIron Horse MagazineRenegade biker MagazineBackstreet Heroes (london)and Xtreme Bikes (spain)

as well as counless blogs and online e-zines such as Knucklebuster,Bike Exif,biker metric,Visual Gratification, and the mighty Cyril Huze Blog

The TT has made its mark at many prestigous shows as well

2008 Smokeout East winner2009 Easyriders Nationals Editors Choice winner (columbus)2009 Easyriders VQ Award winner2009 AMD World Championship of Custom Bike Building 6th place freestyle2009 Ace Cafe/AMD Partner’s pick award winner2010 Timonium Md Best in show winner2010 Artistry In Iron Master Builders Competition Competitor

The bike has also earned a good reputation with Triumph North America and was on Display at the 2010 Triumph dealer’s annual conference as well as their display and spring Daytona 2010.

“it is truly a piece of art, and a fine example of quality workmanship” Monika Boutwell (director of Marketing Triumph North America)“this bike KILLS it on every level” Grail Knucklebuster inc.“truly spellbinding” Visual Gartification“a true original” Bike Exif” I like this bike very much and I know why” Cyril Huze

More Photos/info of the bike can be found at http://www.amdchampionship.com/content.php?page=registry&section=viewbike&event=2009world&bikenumber=046

Details:

Frame: one off lugged design with removable cradleFrontend: one off druid style girderwheels: 19″ laced front and rearTires: firestone military biasBrakes: mini conical drum front, one off jackshaft mounted drum rearengine: 2006 Triumph Bonneville black 865CC parallel twinclutch:barnettCarbs: Keihin CR roundslidesseat: one off hand sewn leatherwiring: LC fab “chopper style” minimal wiringbars pipes pegs etc etc are all one off custom pieces

TT DeluxeThis bike may be one of my all-time favorite builds.  It combines a vintage vibe, paying homage to the early Triumphs (1910's) yet has a modern (2006 Bonneville Black) Triumph power plant.  Jeremy Cupp of LC Fabrications worked out the perfect combination, blending the old with the new for an amazing custom café racer.   The level of detail is stunning, with virtually all the work including paint and leather being performed by Cupp himself.  The tank is the standout element of the bike to me.  The 1910-1914 Triumph logo is perfect as is the shape and use of the scalloped paint scheme.  I'm loving everything about this bike.http://caferacersunited.com/triumph-tt-deluxe-cafe-racer-by-lc-fabrications/HomeCafe RacersTrackersProject BikesHow ToVideoWebshopWebwinkelTRIUMPH TT DELUXE CAFE RACER BY LC FABRICATIONS

Check out this beautiful Triumph TT Deluxe Cafe Racer made by LC Fabrications.

LC Fabrications is a machine/vintage motorcycle shop in the rolling, green foothills of Virginia. Owned and operated by Jeremy Cupp the focus is on timeless craftsmanship and seriously handsome motorcycles. This particular bike, the TT Deluxe, was loosely modelled on bikes of the 1910s (Triumphs in particular) but features a 2006 Triumph Bonneville engine and transmission (They bough the bike for 300$!!). The chassis was hand-fabricated as was the tank, the bike uses handmade Druid forks and a seat made by Jeremy and his wife Lindsay.

If you take some time to carefully go over these photos you’ll notice a staggering number of subtle touches, this sort of build quality is reminiscent of builders like Falcon and Walt Siegel (and there aren’t many builders who deserve a credit like that).

Notable features of the build are that springer seat set up, beautifully integrated leather kneepads on either side of the fuel tank, the wonderful steampunk headlight and copper tubing used around the engine and the two-tone paint job on the inside of the wheel rims.

What the guys of LC Fabrication have to say about their Triumph TT Deluxe Cafe Racer

I suppose this bike started about a year ago when I saw one of the scramblers on eBay. There was just something that drew me to that bike like a cop to a doughnut. I called a buddy of mine who has a salvage business (I do his paint) and told him to be on the look out for a new Triumph, I didn’t care what just something affordable. About two weeks later he called and said he found an ’06 Bonneville black on an auction that had smoke damage. We wound up winning it for $300.00!

As winter drew near and “new project” time got closer I decided to use this for a donor bike – something a little different from the norm, while being modern and reliable, and yet still cool. So I had a power plant, and no idea what to build around it. I did some research on 1900’s to 1930’s European bikes of all types and tried to make a mental note of what was cool. I suppose that the main things that stuck out were the tank style (loosely after a 1910 Triumph), the druid style front end, the knobbies, center stand, and friction steering dampener.

For the frame, I went with a lugged design for some extra detail, and made the cradle removable to help stick with that European style. I did the jackshafted drive to clean up the right side of the wheel, and really to just try something different. Once I got that figured out is when I decided to try a drum rear brake mounted to the jackshaft. I tried several old drums of different makes but nothing was quite right so I had to hunker down and make one. I wound up using aluminum, which I heat-shrunk a sleeve into. The real pain in the arse on this was making it all fit together without too much runout.

Early one Saturday morning I mounted a sort of traditional rear fender and bicycle seat. It was pretty cool but it just didn’t do it. Later that night I sat down with a print-out of the bike up on the table and started drawing. I loosely sketched the café boat tail thing, and SHIZAAM – it was awesome. I went to the shop the next morning and got started bending up some rod! I suppose this is where the whole project shifted gears from classy antique custom to 1900-ish café racer sort of thing. Race bike in mind, the 2-into-1 lakester pipes and drop bars fit naturally. Another thing I really wanted was inverted levers. Not wanting to copy what Dave Cook is famous for, I called him up and wound up getting away with the very first set of stainless levers he has ever made.

For paint I wanted to stay sort of scalloped style (Triumph thing). The logos on the tank are copper leaf versions of the 1910-1914 triumph logo. The “3” has nothing to do with NASCAR, this is my third complete bike build, and yes, the other two are numbered as well. My wife, Lindsay, and I spent evenings at the kitchen table doing the leather work. The wiring on this bike was probably the biggest challenge. A modern engine with all the emissions and safety crap has a wiring diagram that looks like a bowl of spaghetti noodles. At first I went through a lot of trouble to find someone who’d tackled the task before…..no luck. It seems everyone who’s ever done one of these simply stuffs the entire factory harness and all of its “mystery boxes” into a fake oil tank, which was not the route I wanted to take. I sat down with a factory diagram, the original harness, and a volt-ohm meter, around 30 or so hours later I had myself what is apparently the first ever chopper-style wiring schematic for a modern Triumph in existence. A lot of headaches, but I now have some pretty clean wiring that only uses what I need – no horn, no dimmer, no emissions, no safety crap, just good old spark, charging, and lights. — Jeremy Cupp, LC Fabrications

TT Deluxe was the AMD 2009 World Championship 6th place Freestyle winner, the Smoke Out 9 winner, and Easyriders National VQ Award winner.

LC Fabrications Triumph TT Deluxe

LC Fabrications Triumph TT DeluxePublished by Cyril Huze August 15th, 2009 in Builders, Customs, Editorial and Events.

Among the participants in the Free Style Class of the 2009 AMD World Championship Of Bike Building, I like very much this bike and I know why.

A somewhat unusual design, a Triumph engine (Bonneville 865 cc) and transmission, a Girder front end, a mini conical drum front brake, Jackshaft mounted drum in the rear, inverted hand control levers, a simple and well detailed 2 in 1 exhaust, copper lines and…no chrome.

Jeremy Cupp got a 6th place trophy and he should be very proud of it. LC Fabrications (pictures HRF).

Triumph TT Deluxe Café Racer by LC Fabrications

TRIUMPH TT DELUXE CAFÉ RACER BY LC FABRICATIONS

Reading time: about 1 minute.

BRITISHCAFÉ RACERSMOTORCYCLESRETRO

What would a café racer look like if it had been built in 1910 instead of 1960? It’s a question that has been asked before but to my knowledge, this is the first time someone has actually taken to the workshop and produced such a mythical beast.

LC Fabrications is a machine/vintage motorcycle shop in the rolling, green foothills of Virginia. Owned and operated by Jeremy Cupp the focus is on timeless craftsmanship and seriously handsome motorcycles. This particular bike, the TT Deluxe, was loosely modelled on bikes of the 1910s (Triumphs in particular) but features a 2006 Triumph Bonneville engine and transmission. The chassis was hand-fabricated as was the tank, the bike uses handmade Druid forks and a seat made by Jeremy and his wife Lindsay.

If you take some time to carefully go over these photos you’ll notice a staggering number of subtle touches, this sort of build quality is reminiscent of builders like Falcon and Walt Siegel (and there aren’t many builders who deserve a credit like that).

Notable features of the build are that springer seat set up, beautifully integrated leather kneepads on either side of the fuel tank, the wonderful steampunk headlight and copper tubing used around the engine and the two-tone paint job on the inside of the wheel rims.

All images below aren’t huge but they’re the highest resolution we could get our hands on, click for  a larger view.

 

Via LC Fabrications

http://motoscoops.blogspot.com/2011/04/tt-deluxe.html

his bike may be one of my all-time favorite builds.  It combines a vintage vibe, paying homage to the early Triumphs (1910's) yet has a modern (2006 Bonneville Black) Triumph power plant.  Jeremy Cupp of LC Fabrications worked out the perfect combination, blending the old with the new for an amazing custom café racer.   The level of detail is stunning, with virtually all the work including paint and leather being performed by Cupp himself.  The tank is the standout element of the bike to me.  The 1910-1914 Triumph logo is perfect as is the shape and use of the scalloped paint scheme.  I'm loving everything about this bike.

Posted by Moto Scoopshttp://radical.flat.twin.over-blog.com/tag/most%20famous%20bikes/7most famous bikes (326) : TT Deluxe - LC FabricationsTT Deluxe - LC Fabrications2009 World Championship - FreestyleBuilder : Jeremy CuppLocation : Grottoes, VACountry : USAWebsite : www.lcfabrications.com   Bike Name : TT DeluxeYear / Model : 2008 LCFab CustomEngine Make / Size : 2006 Triumph Bonneville 865ccTransmission Type : Triumph 5 spdFrame Make / Type : LCFab CustomFront End : LCFab Druid GirderRake : 31 degStretch : 3"Swingarm : noneWheels - Front : 19" lacedWheels - Rear : 19" lacedTires - Front : 19x3.5 firestoneTires - Rear : 19x3.5 firestoneBrakes - Front : conical mini drumBrakes - Rear : Jackshaft Mounted Drum by LCFabPainter : Jeremy CuppChroming / Plating : NoneAdditional Info : Keihin CR smoothbore carbs, LCFab custom wiring, LCFab custom seat/boattail, LCFab SS 2 into 1 exhaust, all one-off parts, mounts, final drive, elliptical axle adjusters, etc done in house by LC Fabrications. Dave Cook inverted levers.sources : http://www.amdchampionship.com & www.lcfabrications.com

LC Fabrications TT Deluxe Triumph Custom

http://www.amdchampionship.com/bikes/2289-lc-fabrications-tt-deluxe.html

LC FABRICATIONS

2009 World Championship competitorBuilderJeremy CuppOwnerJeremy CuppLocationGrottoes, VACountry USAWebsitewww.lcfabrications.comBike NameTT DeluxeYear/Model2008 LCFab CustomEngine Make/Size2006 Triumph Bonneville 865ccDrivetrainTriumph 5 spdFrame Make/TypeLCFab CustomFront EndLCFab Druid GirderRake31 degStretch3"SwingarmnoneWheels Front19" lacedWheels Rear19" lacedTires Front19x3.5 firestoneTires Rear19x3.5 firestoneBrakes Frontconical mini drumBrakes RearJackshaft Mounted Drum by LCFabPainterJeremy CuppChroming/PlatingNoneAdditional InfoKeihin CR smoothbore carbs, LCFab custom wiring, LCFab custom seat/boattail, LCFab SS 2 into 1 exhaust, all one-off parts, mounts, final drive, elliptical axle adjusters, etc done in house by LC Fabrications. Dave Cook inverted levers.

© AMDChampionship.com

LC Fabrications – Jeremy Cupp Photos

http://www.lcfabrications.com/project_bikes_tt_deluxe.html

2006 Custom Built Motorcycles Bobber Lc Fabrications Triumph Tt Deluxe Custom Board Track Café Racer Award Winner

Check out this great Bobber listing!

Current Price: $24999.00 | Bid $24999.00 Now! | # of Bids: 0
End Time: 2017-06-03T19:29:16.000Z | Located in Postal Code: 02048

Click here for more images!

Bid $24999.00 Now!

2002 Custom Built Motorcycles Bobber 2002 Custom Motorcycle Bobber For Sale $2900.00

Custom Bobber

2002 Custom Built Motorcycles Bobber 2002 Custom Motorcycle Bobber

Check out this great Bobber listing!

Current Price: $2900.00 | Bid $0.00 Now! | # of Bids: 0
End Time: 2017-06-03T03:52:52.000Z

| Located in Postal Code: 48374

Incredible Shadow 750 chopped to a head turning Bobber.Bike started as a 2002 Honda Shadow VT750CAll new paint to the Mustang Grabber Blue paint code.The following is custom and or rebuilt:Hand fabricated seat pan & leather springer seat.New EBC clutch.Rebuilt carbs, jetted with velocity stacks.New tires front and rear.Custom bobbed rear fender.Lowered handle bars.Tucked blinkers.Custom license plate with 32 tail light.Baffles out exhaust with glass wrap.Bike has normal wear for this age bike and has minor pitting on the rims.Rides and sounds great for a very comfortable cruiser. There was many hours to get the right look for this bad ass bobber. Summer is hitting quick so don't miss out on this ride.Seller reserves the right to delete this listing at anytime. ***Buyer is responsible for all shipping, crate or local pick up. The bike is in Novi, Michigan***

2002 Custom Built Motorcycles Bobber 2002 Custom Motorcycle Bobber

Check out this great Bobber listing!

Current Price: $2900.00 | Bid $0.00 Now! | # of Bids: 0
End Time: 2017-06-03T03:52:52.000Z | Located in Postal Code: 48374

Click here for more images!

Bid $0.00 Now!

2017 Custom Built Motorcycles Bobber Mmw Og Gangster 250 Tire 23 Front Bobber Rigid Rolling Chassis For Sale $5800.00

2017 Custom Built Motorcycles Bobber Mmw Og Gangster 250 Tire 23 Front Bobber Rigid Rolling Chassis

Check out this great Bobber listing!

Current Price: $5800.00 | Bid $0.00 Now! | # of Bids: 0
End Time: 2017-06-01T15:34:37.000Z

| Located in Postal Code: 91362

 

 

  

 

MALIBU MOTORCYCLE WORKS

ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO)

WE SHIP WORLDWIDE

WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION

 TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD

PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS 

WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION

 MADE IN THE USA

 

SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD 

2017 MMW OG GANGSTER 250 TIRE  BOBBER    .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN  OR BELT  ,35 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 2  UP STRETCH ,,  RIGHT   SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   18X8.5 , 23X3.5   MMW WIRE  WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR AVON    TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  REAR FENDER ,  RISER,RAPED APES BARS ,  , KICK STAND

NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .

LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE 

 CHOPPER PRO-STREET  BOBBER CUSTOM

S&S ULTIMA LONG AND LOW

MOTORCYCLE 130,150,180,200, 240,250,280 300 330 360 RSD RIGHT SIDE DRIVE ,LEFT SIDE DRIVE LSD

BELT DRIVE BDL PRIMO , , KIT BIKE ,

On Sep-08-07 at 18:14:46 PDT, seller added the following information:

On Feb-07-12 at 12:09:24 PST, seller added the following information:

<div style="text-align:center"><a style="text-decoration:none" href="http://mostpopular.sellathon.com/?id=AC358942"><img src="http://www.sellathon.com/Resources/Images/countercredit.gif" border="0"></a></div>

2017 Custom Built Motorcycles Bobber Mmw Og Gangster 250 Tire 23 Front Bobber Rigid Rolling Chassis

Check out this great Bobber listing!

Current Price: $5800.00 | Bid $0.00 Now! | # of Bids: 0
End Time: 2017-06-01T15:34:37.000Z | Located in Postal Code: 91362

Click here for more images!

Bid $0.00 Now!